●The 60347455 (Model 30Mpa-24V-9.8M-G1/4-DT / 30MPa-24V-G1/4-DT) Pressure Switch ( Реле давления / Выключатель давления / Interruptor de presión) is a heavy-duty hydraulic pressure monitoring switch engineered for SANY wheel loaders and hydraulic machinery.
●Material number 60347455 is installed on the main hydraulic valve block, pilot manifold, or service brake accumulator circuit. Featuring a robust G1/4 threaded hydraulic port and a Deutsch DT waterproof electrical connector, it converts fluid line pressure into discrete electrical on/off signals. When hydraulic system pressure reaches the preset 30 MPa threshold (or drops below operating safety limits), internal spring-loaded diaphragm contacts trigger electrical feedback to the vehicle control unit (VCU/ECU). This triggers low-pressure brake alarms, hydraulic pump load regulation, or pilot interlock safeguards.
●Verify hydraulic thread pitch (G1/4 parallel thread with sealing face), pressure setpoint (30 MPa / 300 bar rating), operating voltage (24V DC), and Deutsch DT connector 2-pin keying prior to order confirmation.
●System Application: Hydraulic system pressure threshold monitoring, brake line safety interlock, and ECU signal transmission
Compatibility note: Cataloged in parts directories and parts manuals for SANY heavy wheel loaders and hydraulic equipment (including SANY SW405K, SW405K1, SYL956, SYL956H, SYL956H5, SY956H series wheel loader hydraulic control valve and brake manifold assemblies). Verify machine model and wiring diagram before ordering.
●SANY 60347455 Pressure Switch KMN Advantages
Part-number matching for genuine SANY 60347455 (30Mpa-24V-9.8M-G1/4-DT) hydraulic pressure switch replacement.
Application support for SANY wheel loaders and heavy construction equipment.
Quality verification covering pressure setpoint accuracy, high-pressure impulse cycle endurance, G1/4 port sealing, and IP67 waterproof connector integrity.
Professional sourcing for SANY pressure sensors (60347458), pilot valves, accumulator relief valves, and hydraulic hose assemblies.
Export-standard protective packaging and international logistics coordination.
●Contact Information
●E-mail: info@kmnparts.com
●Mobile Phone / WhatsApp: +86 1347 5858 598
●Headquarter Address: No 51, Taiping Road, Qingdao City, CHINA
●Branch Office (SANY): Xuhai Road, Jiawang District, Xuzhou City, CHINA
